Control Data 3170 Installation Handbook page 219

I
Typewriter input:
INST LIB lunl DUMP UNIT lun2 EDITION ed DN dn MFC mfc MSC msc
[EXID exid]
lun1 Logical unit number of mass storage device on which library is to be
installed
lun2
ed
Logical unit number of unit containing the library dump file
Edition of library to be installed. This need not be the same as the
edition of the system that was dumped
dn Device number used in the device label
mfc Maximum file count for the new system
msc Maximum segment count per mass storage file for new system
exid External identification used in device label (optional)
4.2.12 END
The END statement terminates MSOS IU P.
Card and Typewriter input:
END
4.3 MSOS IUP MESSAGES
MSOS IUP communicates with the operator through the console typewriter. Messages
are preceded by letter A. I. or D.
A
Operator intervention is required
I Informative
D Destructive
IUP messages are listed in Tables III-4-1 through III-4-2.
I
III-4-8
60410800
D