Control Data 3170 Installation Handbook page 304

12.3 USING THE COSY UPDATE HISTORY FILE OUTPUT
Once a listing is obtained. site modifications may be
apph~1.l
to the COSY update
history file. COSY sequence numbers on the MSOS COSY tape may be easily located
for insertion of site modifications.
Use the COSY sequence numbers found on the right side of the output listing for
INSERT':' and DELETE':' control card parameters.
The following deck structure shows how these revisions may be made and a Hollerith
tape of the combined COSY revisions created.
$JOB" ,
$CTO, LUN 10=COSY UPDATE HISTORY FILE
$CTO, LUN 06 = OUTPUT UNIT FOR HOLLERITH REVISION TAPE
$EQUIP, 10=MT. 06=MT
$COSY, ':', S
INSERT':'
INSERT /
3
10
INSTALLATION MODIFICATION INSERTED
CIC
CIO
77 EOF
88
$EOJ
DELETE':'
DECK':'
INSERT>:'
INSERT /
DELETE':'
DECK':'
END':'
22
RELEASE MODIFICATION REMOVED
1=10, H=06, L, R
3
3
INSTALLATION MODIFICATION INSERTED
22
RELEASE MODIFICA TION REMOVED
I=10, H=06. L. R
Once the Hollerith revision tape is created by the previous job. the COSY, I option
allows its use as input to COSY.
The following example using COSY, I should be followed.
$JOB" ,
$CTO, LUN 01=MSOS COSY TAPE 1
$CTO. LUN 05=SCRATCH TAPE FOR HOLLERITH OUTPUT
$CTO, LUN 06=HOLLERITH REVISION TAPE
$COSY, I=06, S
$COMPASS, I=05, L, R. P
77 EOF
88
$EOJ
60410800 A III -12-3