Advertisement
For example. Selecting WIFI module. I can see the WIFI module is enable.
Opening Peripheral Power
If you want close the specified peripheral power, following the instruction:
Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe"
1.
Selecting module, For example "WIFI"
2.
Selecting "Set" radio button
3.
Press "Enable/Disable" combo box and selecting "Enable"
4.
Press "Apply" button
5.
You should see the peripheral power is on
6.
Note: System need a little time to enable peripheral.
Closing Peripheral Power
If you want close the specified peripheral power, following the instruction:
Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe"
1.
Selecting module, For example "WIFI"
2.
Selecting "Set" radio button
3.
Press "Enable/Disable" combo box and selecting "Disable"
4.
Press "Apply" button
5.
You should see the peripheral power is closed
6.
53
www.advantech.com
Advertisement
