Advantech TREK-674 Manual page 23

If Digital Output Pin is checked, the Digital Output should be HIGH/1
otherwise is LOW/0
Testing DIO
1. Connecting DO to DI as below figure
2. Opening "TREK_V3_Sample_Code_DIO.exe"
3. Press "Start Monitor DI Stats" Button to enable monitoring DI Status as
below figure
4. Control the Digital Output Pin as below figure
5. You should see the "Digital Input" Pin control affected by "Digital Output"
Pin as below figure
4.1.2 Execute VCIL Sample Code
TREK V3 VCIL Sample Code is demonstration of Vehicle Communication
Interface Layer (VCIL) which let user easily to use vehicle protocol.
System Menu
TREK V3 VCIL Sample Code as below figure
23
www.advantech.com