Advantech TREK-674 Manual page 33

2. Checked "Show Data"
3. Pull TrackBar "ON" to receive J1939 data
4. You should see the data came from the J1939 and show on the list
Writing Data
1. Selecting "J1939" page as below figure
2. Filling the J1939 data prepare to send
3. Press "Write" button to send J1939 data as above figure
4. You should see the data on the receiver
Testing Message Filter
1. Selecting "VCIL Control" page
2. Press combo box on the channel and select "J1939 + Mask" as below
figure
33
www.advantech.com