Download
Share
Print this page
Advantech TREK-674 Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Industrial PC
  5. TREK-674
  6. Manual
Advantech TREK-674 Manual

Advantech TREK-674 Manual

Computer
Hide thumbs

Advertisement

Quick Links

Download this manual
U s e r M a n u a l
TREK-674
Computer

Advertisement

loading

Related Manuals for Advantech TREK-674

Summary of Contents for Advantech TREK-674

  • Page 1 U s e r M a n u a l TREK-674 Computer...
  • Page 2 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period.
  • Page 3 Declaration of Conformity This product has passed the WES8 test for environmental specifications. T est conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
  • Page 4 Warning: It is the responsibility of the professional installer to ensure that the system is used exclusively for fixed, point-to-point operations. Warning: When using the device in the United States (or where FCC rules apply), it is the responsibility of the professional installer to ensure to control the output power not greater then the application.
  • Page 5 Visit the Advantech web site at www.advantech.com/support for the latest information about the product. Contact the distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
  • Page 6 Packing List Before setting up, check that the items listed below are included, in good condition. If any item does not accord with the table, please contact your dealer immediately. TREK-674 series Computing Box WIFI+BT 2.4+5G Antenna VIO Cable GIO Cable...
  • Page 7 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. Wichtige Sicherheishinweise Bitte lesen sie Sich diese Hinweise sorgfältig durch.
  • Page 8 Entsorgen Sie Batterien nach Anweisung des Herstellers. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 T eil 1000 beträgt 70dB(A) oder weiger. Haft ungsausschluss: Die Bedienungsanleitungen wurden entsprechend IEC- 704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.
  • Page 9 Maintenance: to properly maintain and clean the surfaces, use only approved products or clean with a dry applicator. CompactFlash: Turn off the power before inserting or removing CompactFlash storage cards. European Contact information: Advantech Europe GmbH Kolberger Straße 7 D-40599 Düsseldorf, Germany T el: 49-211-97477350 Fax: 49-211-97477300...
  • Page 10 Chapter General Information This chapter gives background information on the TREK-674 Computing Box. Sections include: ! Introduction ! General Specifications ! Dimensions...
  • Page 11 Introduction The TREK-674 is a dedicated box computer for industrial, transport trucks, buses and taxis. TREK-674 combined with variety of I/O connectors can be connected to devices like OBD-II (see Ch3.3) or TPMS (Tire Pressure Monitoring System) external modules via COM port. Dual display/dual audio interfaces supporting different resolutions can deliver different applications to different displays;...
  • Page 12 1.2.2 Standard PC Functions CPU: intel Antom Baytrail-I, E3827 (Dual Core, 1.75GHz) System memory: So-Dimm DDR3L-1066/1333 2G or 4G Graphic: Integrated 2D/3D Graphic Engine Storage: CFast 16GB (OS), SSD 64GBUMLC Serial ports: RS-232, WLAN1,WLAN2,WWAN1,WWAN2,GPS,Power in, Smart Display, VGA, A/V in, Vehicle I/O, Generic I/O,USB*2, LAN1, LAN2 Universal serial bus (USB) port: Supports up to three USB2.0*1 &...
  • Page 13 Dimensions igure 1.1 TREK-674 di...

  • Page 14: System Setup

    Chapter 2 System Setup This chapter details system setup on TREK-674 Sections include: ! A Quick Tour of the computer box ! Installation Procedures ! Running the BIOS Setup Program...
  • Page 15 A Quick Tour of the TREK-674 Computing box. Before starting to set up the Computing Box, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illustrated in the figures below. When the Computer box is placed inside truck glove cabinet or under the passenger’s seat next to the driver, its front appears as shown in Figure 2.1.
  • Page 16 Refer to the operating system user instructions about partitioning and formatting the hard drive. Note! The drivers and utilities used for the TREK-674 are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers and utilities.
  • Page 17 Chapter 3 Pin Assignments This appendix explains pin assignments on the TREK-674...
  • Page 18 3.1 Front Side Connectors 3.2 Rear Side Connectors IO Ports Dual CANBus (Raw CAN, J1939,OBD-II/ ISO-15765) Vehicle I/O Port J1587/J1708 RS485 with auto flow control (x1) 4-wire RS-232 (x1) Isolated DI(x4)/ DO(x2) Generic I/O Port CVBS in (x0) Line-Out x1 Mic-in x1 USB 3.0 Type A x1;...
  • Page 19 3.3 VIO A(DSUB15) Define B(Housing) CAN_L CAN_H J1708_DN J1708_DP DGND ODB_CAN_L ODB_CAN_H DGND DR_SPEED#_R DR_SPEED_R DR_DIRECTION#_R DR_DIRECTION_R Smart Display Connector Smart Display Connector Signal Signal Backlight Enable output Panel Power Enable output LVDS Ground Reset Button Input LVDS Clock + LVDS Clock - LVDS Ground LVDS Ground...
  • Page 20 RS-232 Connector RS-232 Connector Signal Signal RS-232 DCD RS-232 RXD RS-232 TXD RS-232 DTR RS-232 Ground RS-232 DSR RS-232 RTS RS-232 CTS RS-232 RI / +5V / +V12...
  • Page 21 Chapter 4 Software demo application setup This appendix explains the software demo application for TREK-674 Sections include: ! Introduction ! How to set up demo application...
  • Page 22 Introduction T o make the hardware easier to access for programmers, Advantech has developed an demo program in order to let customer test the functions on TREK-674. This document describes detailed information for each Advantech demo program so that application developers can become more familiar with using them.
  • Page 23 Pin as below figure 4.1.2 Execute VCIL Sample Code TREK V3 VCIL Sample Code is demonstration of Vehicle Communication Interface Layer (VCIL) which let user easily to use vehicle protocol. System Menu TREK V3 VCIL Sample Code as below figure www.advantech.com...
  • Page 24 J1587 page OBD2 page VCIL Control Page VCIL Control page as below figure Library Version Firmware Version Reset firmware to default (CAN/J1939/OBD2) Channel 1 bus type control (CAN/J1939/OBD2) Channel 2 bus type control (J1708/J1587) Channel 1 bus type control www.advantech.com...
  • Page 25 Read Data control (Press "Start" to monitor bus to read) Read Data method Read Data list Write Data control CAN bus message mask control J1708 Page J1708 page as below figure Read Data control (Press "Start" to monitor bus to read) www.advantech.com...
  • Page 26 Message filter list J1939 Page J1939 page as below figure Read Data control (Press "Start" to monitor bus to read) Read Data list Write Data control J1939 bus message filter control J1939 Address mapping J1587 Page J1587 page as below figure www.advantech.com...
  • Page 27 Read Data list Write Data control ODB2 bus message filter control Testing VCIL Opening "TREK_V3_Sample_Code_VCIL.exe" Select VCIL port and speed for your platform. For example, select the port number 8 on TREK-674 Selecting "VCIL Control" page as below figure www.advantech.com...
  • Page 28 Press combo box on the channel which you want to configure as below figure Selecting Bus type Note: Each channel only can select one bus type at same time. Reset Module Selecting "VCIL Control" page Press "Reset Module" button as below figure www.advantech.com...
  • Page 29 CAUTION: When reset module, all configure for each bus reset to default value. Testing CAN Selecting "VCIL Control" page Press combo box on the channel and select "CAN" as below figure Reading Data Selecting "CAN" page as below figure www.advantech.com...
  • Page 30 Selecting "CAN" page as below figure Set CAN bus speed. For example 250K Filling the CAN bus data prepare to send Press "Write" button to send CAN bus data as above figure You should see the data on the receiver Testing Message Mask www.advantech.com...
  • Page 31 If you set a mask to bus. You should not see the specified CAN ID on the read data list if the ID not passed for the mask Mask Rule:  The CAN Message ID & operator "Mask" equal the "ID" & operator "Mask" www.advantech.com...
  • Page 32 If the input CAN data ID is 0x120, the result not passed. Since 0x120 & 0xffff not equal the ID 0x123 & 0xffff. Testing J1939 Selecting "VCIL Control" page Press combo box on the channel and select "J1939" as below figure Reading Data Selecting "J1939" page as below figure www.advantech.com...
  • Page 33 Press "Write" button to send J1939 data as above figure You should see the data on the receiver Testing Message Filter Selecting "VCIL Control" page Press combo box on the channel and select "J1939 + Mask" as below figure www.advantech.com...
  • Page 34 The system ignores all PGN is not on the list For example, as above figure setting. The system can receive the PGN equal to 0xFEF6, otherwise no. Testing ODB2 Selecting "VCIL Control" page Press combo box on the channel and select "ODB2" as below figure Reading Data www.advantech.com...
  • Page 35 Press "Write" button to send ODB2 data as above figure You should see the data on the receiver Testing Message Filter Selecting "VCIL Control" page Press combo box on the channel and select "ODB2 + Mask" as below figure www.advantech.com...
  • Page 36 The system ignores all PID is not on the list For example, as above figure setting. The system can receive the PID equal to 0x00, otherwise no. Testing J1708 Selecting "VCIL Control" page Press combo box on the channel and select "J1708" as below figure www.advantech.com...
  • Page 37 Reading Data Selecting "J1708" page as below figure Checked "Show Data" Press "Start" button to receive J1708 data You should see the data came from the J1708 and show on the list Writing Data Selecting "J1708" page as below figure www.advantech.com...
  • Page 38 Press "Add MID" button to add the rule to filter You should see the filter was applied on the bus The system ignores all MID is not on the list Testing J1587 Selecting "VCIL Control" page Press combo box on the channel and select "J1587" as below figure www.advantech.com...
  • Page 39 Reading Data Selecting "J1587" page as below figure Checked "Show Data" Press "Start" button to receive J1587 data You should see the data came from the J1587 and show on the list Writing Data Selecting "J1587" page as below figure www.advantech.com...
  • Page 40 Enter specified MID to filter Press "Add MID" button to add the rule to filter You should see the filter was applied on the bus The system ignores all MID is not on the list RTC test Power Management www.advantech.com...
  • Page 41 When the HARD_OFF_DELAY is count to zero, the system power is removed abruptly to avoid extra and abnormal power drain from battery. This parameter is fixed with a value of 60 seconds. After T The system stays off. www.advantech.com...
  • Page 42 Therefore, the LOW_DELAY parameter acts as a filter to prevent incorrect low-battery-event from happening. 4.3.2 Power Management demo program TREK V3 VPM Sample Code TREK V3 VPM Sample Code is demonstration of vehicle power management (VPM). System Menu  TREK V3 VPM Sample Code as below figure www.advantech.com...
  • Page 43 Low Battery Protection & Ignition Control page Backup Battery Information page Alarm Wakeup Control page Common page  VPM Common page as below figure Library Version Firmware Version Car Battery Mode (Decide LBP what voltage mode to use) Current Battery Voltage Ignition Status Mode Control www.advantech.com...
  • Page 44  VPM Low Battery Protection & Ignition Control page as below figure Low Battery Protection Control Ignition Control Backup Battery Information page  VPM Common page as below figure Alarm Wakeup Control page  VPM Common page as below figure www.advantech.com...
  • Page 45 Alarm wakeup Status Control RTC Timer Control Alarm Wakeup Time Control Testing VPM Opening "TREK_V3_Sample_Code_VPM.exe" You should see the firmware version and voltage below figure 4.3.4 TREK-674 power consumption OS: Windows Embedded Standard Burn-in test V6.0 www.advantech.com...
  • Page 46 Therefore, customer can decide how to set the sensitivity value when to trigger G-sensor to send signal to CPU and to back end server through WWAN module. G-sensor is located on the motherboard inside the TREK-674. Please refer the link (http://www.analog.com/static/imported-files/data_sheets/ADXL345. pdf) for the G-sensor datasheet.
  • Page 47 You should see the X,Y,Z value affected by motion TREK V3 ControlPanel Sample Code TREK V3 ControlPanel Sample Code is demonstration of controlling panel like LCD brightness, Hot key status and light sensor status. System Menu  TREK V3 Control Panel Sample Code as below figure www.advantech.com...
  • Page 48 Temperature Sensor Status Reset Firmware LCD Brightness Control  Specifies the maximum/minimum/current level as below figure Note: Level Range is limited to 0-30 and Current level can't out of range.  Specifies the duty cycle of level as below figure www.advantech.com...
  • Page 49 Testing Control Panel Connecting display panel to target machine Opening "TREK_V3_Sample_Code_ControlPanel.exe" You should see the panel firmware version on the screen without any error message as below figure Testing Brightness Control Selecting "Get" radio and press "Apply" button as below figure www.advantech.com...
  • Page 50 Press "Apply" button to apply duty cycle to level You should see the brightness changed. If you following step 1-2, the brightness becomes dark at level 10 Testing Hot key Press display panel hot key You should see the Key Status changed 1 as below figure www.advantech.com...
  • Page 51 Reload the watchdog timer to prevent the system from rebooting Testing Watch Dog Opening "TREK_V3_Sample_Code_Watch_Dog.exe" Press "Get Range" button to check the range of watch dog timer Input the time which you want system keep alive. For example 1 minute as below figure www.advantech.com...
  • Page 52 Library Version Select Peripheral Select Set or Get function Testing Peripheral Control Getting Peripheral Power Status Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe" Selecting module, For example "WIFI". Selecting "Get" radio button Press "Apply" button You should see the peripheral power status as below figure www.advantech.com...
  • Page 53 If you want close the specified peripheral power, following the instruction: Opening "TREK_V3_Sample_Code_PeripheralCtrl.exe" Selecting module, For example "WIFI" Selecting "Set" radio button Press "Enable/Disable" combo box and selecting "Disable" Press "Apply" button You should see the peripheral power is closed www.advantech.com...
  • Page 54 Appendix This appendix explains the TREK-303 detailed information. www.advantech.com...
  • Page 55 Viewing Angle (R/L/B/T) 70° / 70°/ 60°/ 60°. Note! The Brightness control is adjusted by the auto light sensor in the front panel as default; it is also defined by button on the front panel by manual. The color LCD display www.advantech.com...
  • Page 56 TREK-303 Specification TREK-303 demo SW application program Figure 6. 17 www.advantech.com...
  • Page 57 5. Hotkey: You may set the hotkey LED light brightness, the value is from 0 ~100. 6. Key Status: When you press Hot key, the status will change from 0 to 7. Key function Definition: You may set the parameter to connect the application program of the hot key. www.advantech.com...
  • Page 58 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2010 www.advantech.com...