Advertisement
determine the steps necessary to install your operating system on the
computer hard drive.
Note!
The BIOS of the computer supports system boots-up directly from the drive
whenever it is connected using a USB interface.
Power on the computer, or reset the system by pressing the "Ctrl" + "Alt" + "Del"
keys simultaneously. The computer will automatically load the operating
system from the diskette .
When presented with the opening screen of a setup / installation program,
simply fol- low the onscreen instructions. The setup program guides users
through preparations of the hard drive, and installation of the operating system.
When presented with an operating system command prompt, like, A:\>, then it
is nec- essary to partition and format the hard drive, and manually copy the
operating sys- tem files to it. Refer to the operating system user instructions
about partitioning and formatting the hard drive.
Note!
The drivers and utilities used for the TREK-674 are subject to change without
notice. If in doubt, check Advantech's website or contact our
2.4
Programming Function Keys and GPIO/CAN BUS
The Mount Computer provides five function keys, GPIO and CAN bus as
shown in section 2.1. These functions must be activated with the correct
software, that's why we provide an AP library for customers to design their own
software. Refer to Appendix C for more detail.
Some distributors and system integrators may have already
pre- installed system software prior to shipment of your
Mounted
Computer.
application engineers for the latest information regarding
drivers and utilities.
Advertisement
