Advertisement
Set Message Filter
1.
Selecting "J1939" page as below figure
2.
Select Channel and specified PGN to filter
3.
Press "Add Channel, PGN" button to add the rule to filter
4.
You should see the filter was applied on the bus
5.
The system ignores all PGN is not on the list
For example, as above figure setting. The system can receive the PGN equal to
0xFEF6, otherwise no.
Testing ODB2
1.
Selecting "VCIL Control" page
2.
Press combo box on the channel and select "ODB2" as below figure
Reading Data
34
www.advantech.com
Advertisement
