Advertisement
Library Version
1.
Firmware Version and Model Name from panel
2.
Set/Get the variety Level of LCD Brightness
3.
Set/Get the Duty Cycle of various levels with Brightness
4.
Set/Get the Duty Cycle of Hot Key LED Light
5.
Select Read Data Mode of Hot Key
6.
Hot key Status
7.
Light Sensor Status
8.
Temperature Sensor Status
9.
Reset Firmware
10.
LCD Brightness Control
Specifies the maximum/minimum/current level as below figure
Note: Level Range is limited to 0-30 and Current level can't out of range.
Specifies the duty cycle of level as below figure
48
www.advantech.com
Advertisement
