Advantech TREK-674 Manual page 47

Library Version
1.
ON/OFF Monitor GSenor status
2.
GSenor value
3.
Testing GSensor
Opening "TREK_V3_Sample_Code_GSensor.exe"
1.
Pushing monitor GSenor status to ON as below figure
2.
Moving target machine
3.
You should see the X,Y,Z value affected by motion
4.
TREK V3 ControlPanel Sample Code
TREK V3 ControlPanel Sample Code is demonstration of controlling panel
like LCD brightness, Hot key status and light sensor status.
System Menu
 TREK V3 Control Panel Sample Code as below figure
47
www.advantech.com