Advertisement
2.
Filling the J1708 data prepare to send
3.
Press "Write" button to send J1708 data as above figure
4.
You should see the data on the receiver
Testing Message Filter
1.
Selecting "J1708" page as below figure
2.
Enter specified MID to filter
3.
Press "Add MID" button to add the rule to filter
4.
You should see the filter was applied on the bus
5.
The system ignores all MID is not on the list
Testing J1587
1.
Selecting "VCIL Control" page
2.
Press combo box on the channel and select "J1587" as below figure
38
www.advantech.com
Advertisement
