Configuration Menus Overview - ABB Endura APA592 Operating Instruction

Endura APA592
pH / Redox (ORP) transmitter

5.3 Configuration Menus Overview

Note. Parameters displayed are dependent on the option selected at the Analyzer Type parameter.
The following measurement-specific parameters are available:

pH – see Section 7.2.1, page 51

ORP (or Redox), pION – see Section 7.2.2, page 52

Ion Concentration: – see Section 7.2.3, page 53
To access menus from an Operator Page, press the
level of access (enter a user password if necessary). To scroll between menus, press the
Display Overview
Menu
Easy Setup
Exit
Menu
Calibrate
Exit
Menu
Device Setup
Exit
Menu
Input/Output
Exit
Table 5.2 Operating Menus Overview
OI/APA592–EN Rev. E
Section and Function
Easy Setup
1
The Easy Setup menu is used to set up the system quickly and
contains a series of options for users with Advanced level access
permission.
Select
Users with Read Only and Standard access have read-only
permissions and cannot make selections from this menu.
Calibrate
2
Used to calibrate the transmitter.
Select
Device Setup
3
Used to specify temperature sensor and sensor data settings.
Select
Input/Output
4
Used to setup process value high / low ranges, alarm current settings
and linearity options.
Select
5 Start-up and Operation
key (beneath the icon) and select the required
and keys.
43