ABB Endura APA592 Operating Instruction page 64

Endura APA592
pH / Redox (ORP) transmitter
Step Procedure
6
At the calibration results screen(s) check
the new values. Press the
the screen:
or
if a calibration failure message is
displayed, reset the buffer values (see
steps 2 to 5).
7
If the Hold Output screen was selected at
step 1, an option to release the output is
provided at the Release Output screen.
Press the
Output state or the
Hold Output state.
Table 7.4 Auto Buffer Calibration (Continued)
Temperature Calibration
Step Procedure
1
At the Temperature Cal parameter, wait
for the message 'Continue When Stable'
to be displayed then press the
continue.
2
Enter the new temperature using the
and
press the
result screen.
Table 7.5 Temperature Calibration
62
key to exit
key to retain the Hold
key release the
keys to select the new value then
key to continue display the
Screen
Screen
key to
7 Operator Pages and Menus
OI/APA592–EN Rev. E