Pipe-Mount Transmitter Dimensions - ABB Endura APA592 Operating Instruction

Endura APA592
pH / Redox (ORP) transmitter

3.4.3 Pipe-mount Transmitter Dimensions

Dimensions in mm (in.)
A
Fig. 3.5 Pipe Installation
Pipe-mounting an APA592–PH transmitter
Referring to Fig. 3.5:
1. Select a suitable pipe
2. Bolt the transmitter
Note. The pipe-mounting bracket
the different options are shown in Fig. 3.5. The transmitter mounting bolt enables adjustable
positioning (0° to 360°) of the transmitter housing.
3. Attach the pipe-mounting bracket
(included).
OI/APA592–EN Rev. E
138
(5.45)
177
(7.00)
A
(maximum 50 mm [2 in.]) as close as possible to the sensor.
B
to the pipe-mounting bracket
C
C
B
C
C
securely in the required position.
supports variable installation positions. Two examples of
to the pipe securely using the U-bolt, nuts and washers
3 Mechanical Installation
249
(9.08)
21