ABB Endura APA592 Operating Instruction page 91

Endura APA592
pH / Redox (ORP) transmitter
Command
Description
No.
48 Read Device Status
Write Sensor Serial
49
Number
Write Number of
59
Response Preambles
Write Burst Mode
108
Command Number
Write Burst Mode
109
Control
Table 9.2 HART Common Practice Commands (Continued)
OI/APA592–EN Rev. E
Details
The status of the device, determined from results of the
continuous self-diagnostics, is reported every time
communications with the device are established.
If the device indicates there is additional status information,
it can be obtained via this command.
Sensor serial number can be entered.
User can access and write the number of Response
Preambles
Burst command numbers 1, 2, 3 can be entered.
User can turn ON/OFF Burst mode with this command.
9 HART Communication
89