Configuration Menus Overview - ABB Endura ACA592-TC Operating Instructions Manual

Endura ACA592
Toroidal conductivity transmitter

5.3 Configuration Menus Overview

Note. Parameters displayed are dependent on the option selected at the Analyzer Type parameter.
The following measurement-specific parameters are available:

Toroidal / Conductivity – see Section 7.2.1, page 50

Toroidal / Concentration: – see Section 7.2.2, page 51
To access menus from an Operator Page, press the
level of access (enter a user password if necessary). To scroll between menus, press the
Display Overview
Menu
Easy Setup
Exit
Menu
Calibrate
Exit
Menu
Device Setup
Exit
Menu
Input/Output
Exit
Menu
Display
Exit
Table 5.2 Operating Menus Overview
42
Section and Function
Easy Setup
1
The Easy Setup menu is used to set up the system quickly and
contains a series of options for users with Advanced level access
permission.
Select
Users with Read Only and Standard access have read-only
permissions and cannot make selections from this menu.
Calibrate
2
Used to calibrate the transmitter.
Select
Device Setup
3
Used to specify temperature sensor and sensor data settings.
Select
Input/Output
4
Used to setup logic states, pulse states and current output settings.
Select
Display
5
Enables screen settings, language selection and the display format to
be specified.
Select
5 Start-up and Operation
key (beneath the icon) and select the required
and
OI/ACA592/TC–EN Rev. B
keys.