Start-Up And Operation; Navigating Menus And Parameters - ABB Endura APA592 Operating Instruction

Endura APA592
pH / Redox (ORP) transmitter

5 Start-up and Operation

5.1 Navigating Menus and Parameters

The four keys below the display are used to navigate menus and to execute all system commands and
selections.
Fig. 5.1 Display and Keys
Item Description
A
Screen title at the current level / parameter
B
Main level icon
C
Menu level title
D
Prompt executed by pressing the
E
Prompt executed by pressing the
F
Left key – used for parameter navigation and to enter editable parameters
Up / Down keys – used to scroll through menu options and to increase / decrease values in editable
G
parameters
H
Right key – used to accept / select parameter values / selections and exit sub-levels
Note. The transmitter uses a capacitive touch display. The capacitive keys are calibrated with the glass
cover during initial power up. If problems occur when using the keys, power the transmitter down and
power up again to allow the unit to recalibrate the keys with the glass cover.
40
A
Easy Setup
B
Exit
D
F
Menu
Select
G
key
key
5 Start-up and Operation
C
E
H
OI/APA592–EN Rev. E