Yealink T54S Administrator's Manual page 49

Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->SSID
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi (On)->Known Network (press Add)->SSID
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known
Network->Option->Edit->SSID
static.wifi.X.priority
Parameter
It configures the priority for the wireless network X for the IP phone.
5 is the highest priority, 1 is the lowest priority.
Description
Note: It works only if "static.wifi.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Integer from 1 to 5
Values
1
Default
Network->Wi-Fi->Change Priority
Web UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Move Up/Move
Down
Phone UI
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known
Network->Option->Move Up/Move Down
static.wifi.X.security_mode
Parameter
It configures the security mode of the wireless network X.
Description
Note: It works only if "static.wifi.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
NONE, WEP, WPA-PSK, WPA2-PSK, WPA-EAP or WPA2-EAP
Values
NONE
Default
Network->Wi-Fi->Secure Mode
Web UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->Security Mode
or
Phone UI
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->Security Mode
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi (On)->Known Network (press Add)->Security
Mode
[2]
[2]
Phone Network
<y0000000000xx>.cfg
<y0000000000xx>.cfg
29