Tones Configuration - Yealink T54S Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
Switzerland

Sweden

Russia

United States

Chile

Czech ETSI

Configured tones can be heard on IP phones in the following conditions.
Condition
Dial
Secondary Dial
Ring Back
Busy
Congestion
Call Waiting
Dial Recall
Info
Stutter
Message
Auto Answer

Tones Configuration

The following table lists the parameters you can use to configure tones.
voice.tone.country
Parameter
It configures the country tone for the IP phone.
Description Example:
voice.tone.country = Custom
Description
When in the dialing interface
When adding a comma "," to the digit map (For more
information on digit map, refer to
Digit Map)
Ring-back tone
When the callee is busy
When the network is congested
Call waiting tone (For more information on call
waiting, refer to Call Waiting)
When receiving a call back
When receiving a special message
When receiving a voice mail (For more information on
voice mail tone, refer to Alert
When receiving a text message (For more information
on text message, refer to Alert
When automatically answering a call (For more
information on auto answer, refer to
Dial Plan Defined by
Tone)
Tone)
Auto Answer)
<y0000000000xx>.cfg
374