Search Source List Configuration - Yealink T54S Administrator's Manual

Attributes
display_name
priority
enable
dev
Customizing Search Source File
Open the search source file.
1.
To configure each directory list, edit the values within double quotes in the corresponding field.
2.
For example, enable the local directory search, disable the call log search and specify a priority.
<item id_name="local_directory_search" display_name="Local Contacts" priority="1" enable="1" />
<item id_name="calllog_search" display_name="History" priority="2" enable="0" />
Save the change and place this file to the provisioning server.
3.

Search Source List Configuration

The following table lists the parameter you can use to configure the search source list.
Valid Values
mobile_directory_search
Local Contacts
History
Remote Phonebook
LDAP
Network Directories
BroadSoft Buddies
PhoneBook
Personal Address Book
Network Contacts
Network Call List
Mobile Contacts
1 to 11
1 is the highest priority, 11 is
the lowest.
0/1
0: Disabled
1: Enabled.
T19 T21 T23 T40 T27 T27G
T29 T41 T42 T42S T41S T46
T46S T48 T48S T54S T52;
T29 T46 T46S T48 T48S T52
T54S
Phone Customization
Description
The display name of the
directory list.
Note: We recommend you do
not edit this field.
The priority of the search results.
Enable or disable the IP phone to
search the desired directory list.
The applicable phone models of
the directory list.
Note: Do not edit this field.
203