Power Led Indicator; Power Led Indicator Configuration - Yealink T54S Administrator's Manual

features.text_message_popup.enable
Parameter
It enables or disables the IP phone to pop up the message when it receives a new text
message.
Description
Note: It works only if "features.text_message.enable" is set to 1.
0-Disabled
Permitted
Values
1-Enabled
1
Default
Features->Notification Popups->Display Text Message Popup
Web UI

Power LED Indicator

Power LED indicator indicates power status and phone status.
You can configure the power LED indicator behavior in the following scenarios:
The IP phone receives an incoming call

The IP phone receives a voice mail or a text message

A call is muted

A call is placed on hold or is held

The IP phone is busy

The IP phone misses a call

Topic

Power LED Indicator Configuration

Power LED Indicator Configuration
The following table lists the parameters you can use to configure power LED indicator.
phone_setting.common_power_led_enable
Parameter
It enables or disables the power LED indicator to be turned on.
Description
For
T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T2
7P/T27G/T23P/T23G/T21(P) E2 IP phones:
Permitted
0-Disabled (power LED indicator is off)
Values
1-Enabled (power LED indicator glows red)
For T19(P) E2 IP phones:
0-Disabled (power LED indicator is off)
Phone Customization
<y0000000000xx>.cfg
<y0000000000xx>.cfg
159