Voice Mail; Mwi For Voice Mail Configuration - Yealink T54S Administrator's Manual

Select the desired account from the pull-down list of Outgoing Identity.
2.
Enter the callee's number in the Dial Number field.
3.
Click Dial to dial out the number.
4.
The web user interface prompts "Call Success" and the phone will automatically dial out the number.
You can click Hang Up to end the call.
If it is the first time you place a call via web user interface, the LCD screen will prompt the message "Allow
remote control?". Press OK on the phone to allow remote control and then the phone will automatically
dial out the number.
Note
You can also place an IP direct call via web user interface. The IP phone supports either IPv4 or IPv6 address..

Voice Mail

Yealink IP phones support voice mail.
You can configure a message waiting indicator (MWI) to inform users that how many messages are
waiting in their mailbox without calling the mailbox. Yealink IP phones support both audio and visual
MWI alert when receiving new voice messages.
Topic

MWI for Voice Mail Configuration

MWI for Voice Mail Configuration
Yealink IP phones support both solicited and unsolicited MWI.
Unsolicited MWI: The IP phone sends a SUBSCRIBE message to the server for message-summary
updates. The server sends a message-summary NOTIFY within the subscription dialog each time the MWI
status changes. Unsolicited MWI is a server related feature.
Solicited MWI: The IP phone can subscribe the MWI messages to the account or the voice mail number.
For solicited MWI, you must enable MWI subscription feature on IP phones.
Advanced Features
505