Page 1
ManIT Technology VoIP Handset User Guide Yealink T27 Series...
Page 2
VoIP Handset User Guide – Yealink T27 Series Understanding your phone and buttons Yealink T27P with optional EXP20 module displayed...
Page 3
VoIP Handset User Guide – Yealink T27 Series Phone Feature Description Handset Blunt instrument used to get your message across Displays information about calls, messages, soft keys, LCD Screen date, time and other relevant data (If enabled) may display phone is powered and or flash...
VoIP Handset User Guide – Yealink T27 Series Icon Information Icons appearing on the LCD screen are described in the following table: Icons Description Network is unavailable The private line registers successfully Register failed Registering Hands-free speakerphone mode Handset mode...
VoIP Handset User Guide – Yealink T27 Series LED Information Power Indicator LED: LED Status Description Solid Red The phone is initialising Fast flashing red (300ms) The phone is ringing Slowly flashing red (1s) The phone received a voice The phone is off...
Page 6
VoIP Handset User Guide – Yealink T27 Series Call functions and general use Adjusting Volume: The default volume set in the phone may not be appropriate, to change do the following: Ringer: while phone is idle or ringing, press the volume up/down button to the desired volume.
Page 7
VoIP Handset User Guide – Yealink T27 Series Redial: Dial a previously dialled number 1. Press the RD key to display the Redial List 2. Use the navigation up/down buttons to select the number you wish to dial 3. Once selected press the RD key again to initiate a call.
Page 8
VoIP Handset User Guide – Yealink T27 Series Call Forward: Call Forwarding will divert all incoming calls to another number, while Call Forward is active the Call Forward icon will appear on the LCD screen NOTE: If the extension rings as part of a ring group, call forwarding must be configured to occur AFTER the ring group times out or they will be diverted as well.
Page 9
VoIP Handset User Guide – Yealink T27 Series Disable Call Forward: Press the TRAN key when the phone is idle Transfer a call: You can transfer a call to another party during a call in one of three ways: ...
VoIP Handset User Guide – Yealink T27 Series Do Not Disturb: Do Not Disturb puts the phone in a constant “busy” state, this will redirect all incoming calls to voicemail. While activated will appear on the LCD screen. To active Do Not Disturb, press the DND soft key while the phone is idle.
VoIP Handset User Guide – Yealink T27 Series Voicemail Operations Voicemail, also known as a message bank are voice messages left by a caller when a phone is busy or not answered Create Voicemail Greeting The Voicemail Greeting is the recording a caller will hear if they reach the Voicemail mailbox.
Page 12
VoIP Handset User Guide – Yealink T27 Series Leave a Voicemail Message If a destination is busy or unavailable you may be redirected to voicemail 1. When prompted, record your voicemail message then press any key to end the recording (or hang up) 2.
Page 13
VoIP Handset User Guide – Yealink T27 Series NOTES:...
Page 14
VoIP Handset User Guide – Yealink T27 Series NOTES:...
Page 15
VoIP Handset User Guide – Yealink T27 Series NOTES:...
Need help?
Do you have a question about the T27 Series and is the answer not in the manual?
Questions and answers