Dhcp Vlan - Yealink T54S Administrator's Manual

->Network->VLAN->PC Port->Priority
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

DHCP VLAN

Yealink IP phones support VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP,
the IP phone will examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply
the VLAN ID by default. You can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
static.network.vlan.dhcp_enable
Parameter
It enables or disables the DHCP VLAN discovery feature on the IP phone.
Description
0-Disabled
Permitted
Values
1-Enabled
1
Default
Network->Advanced->VLAN->DHCP VLAN->Active
Web UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->DHCP VLAN
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->DHCP VLAN
static.network.vlan.dhcp_option
Parameter
It configures the DHCP option from which the IP phone will obtain the VLAN settings.
Description
You can configure at most five DHCP options and separate them by commas.
Permitted
Integer from 1 to 255
Values
132
Default
Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
Web UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->Option
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->Option
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
[1]
[1]
Phone Network
<y0000000000xx>.cfg
<y0000000000xx>.cfg
25