Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
Values
4
Default
Settings->Preference->Inter Digit Time (1~14s)
Web UI
Auto Redial
You can set the phone automatically redial the last dialed number when the callee is temporarily
unavailable. Both the number of attempts and waiting time between redials are configurable.
Topic
Auto Redial Configuration
Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
auto_redial.enable
Parameter
It enables or disables the IP phone to automatically redial the last dialed number when
Description
the callee is temporarily unavailable.
0-Disabled
Permitted
Values
1-Enabled
0
Default
Features->General Information->Auto Redial
Web UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Others->Auto Redial->Auto Redial
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Features->Auto Redial->Auto Redial
auto_redial.interval
Parameter
It configures the interval (in seconds) for the IP phone to wait between redials.
Description
The IP phone redials the last dialed number at regular intervals till the callee answers
the call.
Permitted
Integer from 1 to 300
Values
10
Default
Features->General Information->Auto Redial Interval (1~300s)
Web UI
<y0000000000xx>.cfg
<y0000000000xx>.cfg
302