Technical Support; Introduction; Coolmonster/Pm; The Coolmonster Pisa Family - Kontron coolMonster/PM User Manual

Hide thumbs Also See for coolMonster/PM:
Table of Contents

Advertisement

KONTRON

1.6 Technical Support

Technicians and engineers from KONTRON Embedded Modules and/or
its subsidiaries and official distributors are available for
technical support. We are committed to making our product easy
to use and will help you use our products in your systems.
Before contacting KONTRON Embedded Modules technical support,
please
consult
our
Web
site
documentation, utilities, and drivers. If the information does
not help solve the problem, contact us by telephone.
Asia
Europe
Kontron Embedded
Kontron Embedded Modules GmbH
Technology (Asia Pacific)
Far East Science Park, 2nd
Brunnwiesenstr. 16
Floor No. 2, Lane 50, Nan
94469 Deggendorf – Germany
Kang Road Section 3, Nan
Kang District Taipei, Taiwan
Tel: +886-2-2782-0201
Tel: +49 (0) 991-37024-0
Fax: +886-2-2782-7486
Fax: +49 (0) 991-37024-104
coolMONSTER/PM User's Guide
3
for
the
latest
product
North/South America
Kontron America
14118 Stowe Drive
Poway, CA 92064-7147
Tel: 858-677-0877
Fax: (858) 677-0898
User Information

2. Introduction

2.1 coolMONSTER/PM

The
coolMONSTER/PM
hosts
an
Intel®
combination with an Intel® 855GME chipset with an integrated
graphic memory controller hub. Celeron M versions of this board
are possible, too. One DDR-SDRAM-DIMM socket for up to 1 GB
allows you to use standard DDR DIMM memory modules. Three USB
2.0 ports and one 10/100 MBit Ethernet interface extend the
standard connectivity of four serial, one parallel and a PS/2
mouse/keyboard interface.
The
coolMONSTER/PM
is
designed
provides the functionality of the PCI and ISA bus on one well-
defined bus. To connect a backplane with a PISA board, you only
need to use one EISA-like edge card connector. The pin-out of
the upper row of the PISA bus connector corresponds to the pin-
out
of
the
ISA
bus
connector.
signals, which makes it easy to design backplanes with up to
four PCI slots and additional ISA slots.
2.2 The coolMONSTER PISA
coolMONSTER products represent the best scaleable half-size Slot
SBC family. Each coolMONSTER module is characterized by the same
mechanical and electrical pin-out for the Keyboard, COM A-D,
EIDE 40pin and 44pin, LPT, LAN, VGA, USB, and Floppy. These
homogeneous
features
facilitate
Kontron Embedded Modules GmbH coolMONSTER product family.
PISA® is the proven space saving concept that provides full PCI
and ISA Bus signals on just half-size Slot boards. The ancestors
were full-sized PICMG boards that have the PCI and ISA card
edges in a row - PISA squeezed them to just half-size, still
serving full PCI and ISA busses. Smaller and cheaper enclosures
were possible that way - while all PCI and ISA periphery is
maintained.
Introduction
4
KONTRON
Pentium®
M
processor
in
in
the
PISA
format,
which
The
lower
row
provides
PCI
®
Family
easiest
upgrades
within
the
coolMONSTER/PM User's Guide

Advertisement

Table of Contents
loading

Table of Contents