Table of Contents
Advertisement
KONTRON
25.8 Exit Menu
The following sections describe the five options in Exit Menu.
Pressing <Esc> does not exit this menu. You must select an item
from the menu to exit.
Feature
Option
Exit Saving Changes
Saves selections and exits setup.
The next time the system boots,
the BIOS configures the system
according to the Setup selection
stored in CMOS.
Exit Discarding
Exits Setup without storing in
Changes
CMOS any new selections you
may have made. The selections
previously in effect remain in
effect.
Load Setup Defaults
Displays default values for all the
Setup menus.
Discard Changes
If, during a Setup session, you
change your mind about changes
you have made and have not yet
saved the values to CMOS, you
can restore the values you saved
to CMOS.
Save Changes
Saves all the selection without
exiting Setup. You can return to
the other menus to review and
change your selection.
coolMONSTER/PM User's Guide
89
Description
Exit saving changes.
Exit discarding changes.
Load setup defaults.
Discard changes.
Save changes.
Appendix B: BIOS Operation
25.9 Kontron BIOS Extensions
Besides the Phoenix System BIOS, the coolMONSTER/PM comes with a
few
BIOS
extensions
that
support
extensions
are
located
in
the
extensions
are
permanently
available;
required during boot up. Supported features include:
†
JIDA standard
†
Remote Control (JRC)
†
Onboard LAN RPL ROM
All enabled BIOS extensions require shadow RAM. They will be
loaded into the same 32K shadowed memory block, if possible.
However, if the system memory cannot find free memory space
because all the memory is already used for add-on peripherals,
the BIOS extensions do not load.
25.9.1
JIDA BIOS extension
The
JUMPtec
Intelligent
Device
extension is not a true extension BIOS. It is part of the system
BIOS and is located in the system BIOS segments after boot up.
It is permanently available and supports the JIDA 16-bit and
JIDA 32-bit standard.
The JIDA 16-bit standard is a software interrupt 15hex driven
programmers
interface
and
offers
functions. For detailed information about programming, refer to
the JIDA specification and a source code example (JIDAI???.ZIP),
which you can find at the Kontron Web site. The three question
marks represent the revision number of the file. You also can
contact technical support for this file.
For
other
operating
systems,
(JIDAIA??.ZIP) are available. You can download the zip file from
the Kontron Web site.
Remote Control Client Extension
25.9.2
You
can
remotely
control
the
available
from
Kontron
(JRC-1,
This software tool can communicate with the board via one of the
serial ports. During boot-up, the system BIOS scans the serial
Appendix B: BIOS Operation
90
KONTRON
special
features.
All
onboard
flash
EEPROM.
Some
some
are
loaded
if
Architecture
(JIDA)
BIOS
lots
of
board
information
special
32-bit
drivers
coolMONSTER/PM
using
software
Part
Number
96047-0000-00-0).
coolMONSTER/PM User's Guide
Advertisement
Table of Contents
