Main Menu - Kontron coolMonster/PM User Manual

KONTRON
Legend Bar
Use the keys listed in the legend bar on the bottom to make your
selections or exit the current menu. The table below describes
the legend keys and their alternates.
Key
<F1> or <Alt-H> General Help window.
<Esc>
← or → Arrow key
↑ or ↓ Arrow key
Select fields in current menu.
<Tab> or <Shift-Tab> Cycle cursor up and down.
<Home> or <End> Move cursor to top or bottom of current window.
<PgUp> or <PgDn> Move cursor to next or previous page.
<F5> or <-> Select previous value for the current field.
<F6> or <+> or <Space> Select next value for the current field.
<F9> Load the default configuration values for this menu.
<F10>
<Enter> Execute command or select submenu.
<Alt-R>
Selecting an Item
Use the ↑ or ↓ key to move the cursor to the field you want.
Then use the + and – keys to select a value for that field. Save
Value commands in the Exit menu save the values displayed in all
menus.
Displaying Submenus
← or → key to move the cursor to the submenu you
Use the
want. Then press <Enter>. A pointer (4) marks all submenus.
Item Specific Help Window
The Help window on the right side of each menu displays the Help
text for the selected item. It updates as you move the cursor to
each field.
General Help Window
Pressing <F1> or <Alt-F1> on a menu brings up the General Help
window that describes the legend keys and their alternates.
Press <Esc> to exit the General Help window.
coolMONSTER/PM User's Guide 71
Function
Exit menu.
Select a menu.
Save and exit.
Refresh screen.
Appendix B: BIOS Operation

25.3 Main Menu

Feature Option
System Time HH:MM:SS
System Date MM/DD/YYYY
Legacy Diskette A 360 Kb, 5 ¼ "
1.2 MB, 5 ¼ "
720 Kb, 3 ½ "
1.44/1.25 MB, 3 ½ "
2.88 MB, 3 ½ "
Disabled
Legacy Diskette B 360 Kb, 5 ¼ "
1.2 MB, 5 ¼ "
720 Kb, 3 ½ "
1.44/1.25 MB, 3 ½ "
2.88 MB, 3 ½ "
Disabled
8Primary Master
Autodetected drive
8Primary Slave
Autodetected drive
8Compact Flash
Autodetected drive
Smart Device Disabled
Monitoring Enabled
System Memory N/A
Extended Memory * N/A
Notes: In the Option column, bold shows default settings.
(*) Extended Memory = capacity of memory module – selected frame buffer
memory size
Appendix B: BIOS Operation 72
KONTRON
Description
Sets system time.
Press <Enter> to move to MM or SS.
Sets the system date.
Press <Enter> to move to DD or
YYYY.
Select the type of floppy disk drive.
Select the type of floppy disk drive.
Displays result of PM autotyping.
Displays result of PS autotyping.
Displays result of CF autotyping.
Turns on Self-Monitoring Analysis-
Reporting Technology, which
monitors the condition of the hard
drive and reports when a
catastrophic IDE failure is about to
happen.
Displays amount of conventional
memory detected during bootup.
Displays amount of extended
memory detected during bootup.
coolMONSTER/PM User's Guide