Table of Contents
Advertisement
KONTRON
ICH4 (82801DB)
5.2.2
†
PCI 2.2 Bus interface at 33MHz
†
Integrated LAN controller
•
WfM 2.0 and IEEE802.3 compliant with 10/100 Mbit/s Ethernet
support
†
USB
•
Two UHCI USB 1.1 or one EHCI high speed USB 2.0 host
controller(s)
•
Supporting up to 3 ports (2 available on the coolMONSTER
board's slot connector, 1 on internal feature connector)
†
AC-Link for AC'97 support
†
Integrated IDE controller
•
Ultra ATA/100/66/33 and PIO mode support
•
Two channels for up to 4 devices with independent timing
•
Support of "Native Mode" register and interrupts
†
Interrupt Controller
•
Two cascade 83C59 with 15 interrupts
•
Integrated I/O APIC capability with 24 interrupts
†
Enhanced DMA
•
Two cascaded 8237 controllers
•
Supports PC/PCI DMA and LPC DMA
•
Supports DMA collection buffers
†
Timers based on 82C54
†
Power Management Logic
•
ACPI 2.0 compliant
•
Supports PCI PME#
†
Low Pin Count (LPC) Interface
†
SM Bus 2.0 interface (System Management Bus)
coolMONSTER/PM User's Guide
17
CPU, Chipset and Super I/O
5.3 Super I/O
The super I/O device is a SMSC SCH3114 that is connected to the
LPC (Low Pin Count) Bus. This device provides the following
additional features:
†
Four serial ports (one port capable of RS422/RS485
functionality)
†
One Multi-Mode Parallel Port
†
Floppy Disk Controller
†
PS/2-Keyboard Controller and PS/2-Mouse Interface
†
5V CPU Fan
5.4 CPU, Chipset and Super-I/O
Configuration
See the Advanced Menu and its submenus section of the Appendix
B: BIOS chapter for information on possible settings.
CPU, Chipset and Super I/O
18
KONTRON
coolMONSTER/PM User's Guide
Advertisement
Table of Contents
