Table of Contents
Advertisement
KONTRON
LAN Options
25.4.8
Feature
Option
LAN MAC address
Onboard LAN Controller
Disabled
Enabled
Onboard LAN PXE ROM
Disabled
Enabled
Enable WOL
Disabled
Enabled
25.4.9
SIO Options
Feature
Option
Floppy disk controller
Disabled
Enabled
Serial port A
Disabled
Enabled
Auto
Serial port B
Disabled
Enabled
Auto
Normal,
Mode
IR
Serial port C
Disabled
Enabled
Auto
Serial port D
Disabled
Enabled
Auto
Interface
RS232,
RS485
Base I/O address
3F8h, 2F8h, 3E8h,
2E8h, 220h, 228h
IRQ
IRQ 3, IRQ 4, IRQ10,
IRQ11
Parallel Port
Disabled
Enabled
Auto
Mode
Output only
Bi-directional
EPP
ECP
EPP & ECP
Base I/O address
378h, 278h, 3BCh
Interrupt
IRQ 5, IRQ 7
DMA channel
DMA1, DMA3
coolMONSTER/PM User's Guide
79
Description
Displays adapter's MAC address
Enables the ICH4 internal LAN controller.
Enables the remote boot BIOS extension for the
onboard LAN controller.
Enables the wake on LAN BIOS extension for the
onboard LAN controller.
Description
Enable / Disable the onboard FDC controller.
Disabled turns off the port.
Enabled requires end user to enter the base I/O
address and the IRQ.
Auto makes the BIOS configure the port.
Disabled turns off the port.
Enabled requires end user to enter the base I/O
address and the IRQ.
Auto makes the BIOS configure the port.
Set the mode for Serial Port B.
Disabled turns off the port.
Enabled requires end user to enter the base I/O
address and the IRQ.
Auto makes the BIOS configure the port.
Disabled turns off the port.
Enabled requires end user to enter the base I/O
address and the IRQ.
Auto makes the BIOS configure the port.
Set the mode for Serial Port D.
Select I/O base of port.
Select IRQ
Set the mode for Parallel Port
Select I/O base of port.
Select IRQ
Set the DMA channel for the parallel port in ECP
mode
Appendix B: BIOS Operation
Note: In the Option column, bold shows default settings.
25.4.10
Keyboard Features Submenu
Feature
Option
Numlock
Auto
On
Off
Key Click
Disabled
Enabled
Keyboard auto-repeat rate
30/sec, 26.7/sec, 21.8/sec,
18,5/sec, 13.3/sec, 10/sec,
6/sec, 2/sec
Keyboard auto-repeat delay
¼ sec, ½ sec, ¾ sec, 1 sec
Note: In the Option column, bold shows default settings.
25.4.11
Hardware Monitor Submenu
This submenu shows the current voltages, temperatures and the
fan speed of the system.
Voltage/Temperature/Fan
VCC 3.3V Voltage
CPU Core Voltage
5Vsb Voltage
Battery Voltage
CPU Temperature
CPU Fan Speed
Appendix B: BIOS Operation
80
KONTRON
Description
On or Off turns NumLock on or off at
boot up.
Auto turns NumLock on if it finds a
numeric key pad.
Turns audible key click on.
Sets the number of times to repeat a
keystroke per second if you hold the
key down.
Sets the delay time after the key is
held down before it begins to repeat
the keystroke.
Explanation
3.3V power plane
CPU core voltage
5V-Standby voltage
Battery voltage
CPU Temperature in °C and °F
CPU fan speed in rpm
coolMONSTER/PM User's Guide
Advertisement
Table of Contents
