ProSoft Technology MVI56E-MNETC User Manual page 46

MVI56E-MNETC/MNETCXT Configuration
User Manual
Each command list record has the same general format. The first part of the
record contains the information relating to the communication module and the
second part contains information required to interface to the Modbus TCP/IP
server device.
Command Entry Formats
The following table shows the structure of the configuration data necessary for
each of the supported commands.
1 2
Enable Internal
Code Address
Code Register
(bit)
Code Register
(bit)
Code Register 1/10th Seconds Word
Code Register 1/10th Seconds Word
Code 1 bit
Code 1 bit
Code Register
(bit)
Code Register 1/10th Seconds Word
The first part of the record is the module information, which relates to the
MVI56E-MNETC/MNETCXT, and the second part contains information required
to interface to the server device.
Page 46 of 172
Modbus TCP/IP Client Enhanced Communication Module - Client/Server
3 4 5
Poll Interval Count Swap
Time Code
1/10th Seconds Bit 0
Count
1/10th Seconds Bit 0
Count
Code
Count
0
Count
1/10th Seconds Bit 0
Count
1/10th Seconds Word 0
Count
1/10th Seconds Bit 0
Count
0
Count
MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
6 7 8
IP Address Serv Slave
Port Node
IP Address Port # Address Read Coil (0x)
IP Address Port # Address Read Input (1x)
IP Address Port # Address Read Holding
IP Address Port # Address Read Input Registers
IP Address Port # Address Force (Write) Single
IP Address Port # Address Preset (Write) Single
IP Address Port # Address Force (Write)
IP Address Port # Address Preset (Write)
9 10
Function Code Device Modbus
Address
Register
Register
Register
Registers (4x)
Register
(3x)
Register
Coil (0x)
Register
Register (4x)
Register
Multiple Coil (0x)
Register
Multiple Register (4x)
ProSoft Technology, Inc.
September 20, 2018