ProSoft Technology MVI56E-MNETC User Manual page 36

MVI56E-MNETC/MNETCXT Configuration
User Manual
7 Double-click the
8 Click R
EAD
9 Click OK to close the dialog box.
10 Save and Downloading the Project to the Module (page 68) and reboot.
To modify the W

W D
RITE ATA

W R
RITE EGISTER
Note: make sure that the R
For example, if your application requires 2000 words of WriteData starting at register 0, then your
W R
RITE EGISTER
Backplane Error/Status Pointer
-1 to 9955
This parameter sets the address in the internal database where the backplane
error/status data will be placed. If you want the error/status data to be moved to
the processor and placed into the ReadData array, the value entered should be a
module memory address in the Read Data area. If the value is set to -1, the
error/status data will not be stored in the module's internal database and will not
be transferred to the processor's ReadData array.
Enabling the Error/Status Pointer is optional. The error/status data is routinely
returned as part of the input image, which is continually being transferred from
the module to the processor. For more information, see Normal Data Transfer
Blocks (page 106).
Page 36 of 172
Modbus TCP/IP Client Enhanced Communication Module - Client/Server
M icon to open up the Edit - Module dialog box.
ODULE
R C and change the value from 600 to 1000.
EGISTER OUNT
D array, follow the above steps, but substitute:
RITE ATA
for ReadData in RSLogix.
C for Read Register Count in PCB.
OUNT
D and W
EAD ATA
S in PCB must be set to a value of 2000 or greater.
TART
MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
D arrays do not overlap in the module memory.
RITE ATA
ProSoft Technology, Inc.
September 20, 2018