Choosing The Controller Type - ProSoft Technology MVI56E-MNETC User Manual

Reference
User Manual
To open the sample program
1 On the Connected to Go Online dialog box, click the S
2 Choose the sample program file that matches your firmware version, and
then click the S
3 RSLogix will load the sample program.
The next step is to configure the correct controller type and slot number for your
application.

5.7.2 Choosing the Controller Type

The sample application is for a 1756-L63 ControlLogix 5563 Controller. If you are
using a different model of the ControlLogix processor, you must configure the
sample program to use the correct processor model.
1 In the Controller Organizer list, right-click the folder for the controller and then
choose P
ROPERTIES
2 Click the C
the Change Controller dialog box.
3 Open the T
Page 164 of 172
Modbus TCP/IP Client Enhanced Communication Module - Client/Server
button.
ELECT
. This action opens the Controller Properties dialog box.
T or C
HANGE YPE HANGE
dropdown list, and then select your ControlLogix controller.
YPE
MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
ELECT
C button. This action opens
ONTROLLER
F button.
ILE
ProSoft Technology, Inc.
September 20, 2018