ProSoft Technology MVI56E-MNETC User Manual page 35

MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
Modbus TCP/IP Client Enhanced Communication Module - Client/Server
1 In the C
ONTROLLER
U -D
SER EFINED
opens an edit window for the MNETCDATA data type.
2 In the edit window, change the value of the R
INT[1000] as shown, and then click A
Note: If RSLogix resets your data values, refer to the backup copy of your program to re-enter your
configuration parameters.
3 Next, navigate to C
window. Click the M
You execute the rest of the steps in ProSoft Configuration Builder.
4 Start ProSoft Configuration Builder.
5 Double-click the MVI56E-MNETC icon to expand the menu for the module in
PCB.
6 Click the [+] icon next to the
ProSoft Technology, Inc.
September 20, 2018
O window, expand the D
RGANIZATION
folders, and then double-click MNETCDATA. This action
T
ONTROLLER AGS
T tab at the bottom of the edit window.
ONITOR AGS
M
ODULE
MVI56E-MNETC/MNETCXT Configuration
ATA
D array from INT[600] to
EAD ATA
.
PPLY
and double click to open an edit
icon to expand the Module menu.
User Manual
T and
YPES
Page 35 of 172