Writing The Clock Value To The Module - ProSoft Technology MVI56E-MNETC User Manual

Reference
User Manual
To check the status of the message, refer to the ReadClockMSG tag.

5.5.7 Writing the Clock Value to the Module

Expand the MVI56EMNETCCLOCK controller tag.
Set the new Clock value in MVI56EMNETCCLOCK.Config:
Move a value of 1 to MVI56EMNETCCLOCK.Write.
The bit will be automatically reset to 0.
Page 158 of 172
MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
Modbus TCP/IP Client Enhanced Communication Module - Client/Server
ProSoft Technology, Inc.
September 20, 2018