Introduction; Purpose Of This Operating Guide; Additional Resources; Manual And Software Version - Danfoss VLT HVAC Drive FC 102 Operating Manual

Operating Guide | VLT® HVAC Drive FC 102

1 Introduction

1.1 Purpose of this Operating Guide

This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instructions
and general warnings. Always keep this operating guide available with the drive.

1.2 Additional Resources

Other resources are available to understand advanced drive functions and programming.
• The programming guide provides greater detail on working with parameters and shows many application examples.
• The design guide provides detailed information about capabilities and functionality to design motor control systems.
• The Safe Torque Off Operating Guide provides detailed specifications, requirements, and installation instructions for the Safe
Torque Off function.
• Supplementary publications and manuals are available from Danfoss.
See https://www.danfoss.com/en/search/?filter=type%3Adocumentation.

1.3 Manual and Software Version

This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
Table 1: Manual and Software Version
Version
MG80G102

1.4 Approvals and Certifications

The following list is a selection of possible type approvals and certifications for Danfoss drives:
The specific approvals and certification for the enclosed drive are on the nameplate of the drive. For more information, contact the
local Danfoss office or partner.
8 | Danfoss A/S © 2018.10
Remarks
First version
089
Software version
5.32
AQ262141314214en-000101 / 130R0880
Introduction