Danfoss VLT HVAC Drive FC 102 Operating Manual page 4

Operating Guide | VLT® HVAC Drive FC 102
4.9 Lifting the Drive
4.10 Combining Multiple Cabinets from a Split Shipment
4.11 Installing the Enclosed Drive
4.11.1 Creating an Entry for Cables
4.11.2 Installing the Drive with Back-channel Cooling Option
4.11.3 Securing the Cabinet(s) to the Floor
5 Electrical Installation
5.1 Safety Instructions
5.2 EMC-compliant Installation
5.3 Wiring Schematic for D9h and D10h Enclosed Drives
5.4 Wiring Schematic for E5h and E6h Enclosed Drives
5.5 Wiring Diagram Cross-reference
5.6 Split Shipment Wiring Harnesses
5.6.1 Connecting Wiring Harnesses
5.6.2 D10h Wiring Harness
5.6.3 E5h Wiring Harness
5.6.4 E6h Wiring Harness
5.7 Control Compartment Wiring
5.7.1 Safety Precautions
5.7.2 Control Compartment Interior View
5.7.3 Control Terminals
5.7.4 Relay Terminals
5.7.5 Option Card Terminals
5.7.6 Overview of Options Wiring
5.8 Connecting Motor, Mains, and Ground Cables
5.8.1 Power Cabling and Grounding Considerations
5.8.2 Connecting to the Mains
5.8.3 Connecting the Drive Module to the Motor
5.8.4 Connecting the Sine-wave Filter to the Motor
5.8.5 Connecting the dU/dt Filter to the Motor
5.8.6 Connecting to Ground
5.9 Installing Upstream Fuses
5.9.1 Upstream Fuse Considerations
5.9.2 Recommended Fuse Ratings for IEC Installation
5.9.3 Recommended Fuse Ratings for UL Installation
5.10 Enabling Motor Operation
5.11 Selecting the Voltage/Current Input Signal
5.12 Setting Up RS485 Serial Communication
5.13 Configuring the Passive Harmonic Filter (PHF)
5.14 Configuring the dU/dt Filter
5.15 Configuring the Sine-wave Filter
4 | Danfoss A/S © 2018.10
Contents
AQ262141314214en-000101 / 130R0880
36
37
39
39
40
40
42
42
42
46
47
48
49
49
50
54
60
66
66
67
68
69
69
72
79
79
81
85
87
89
91
92
92
92
93
94
94
95
96
96
97