Wiring Configuration Examples; Application Examples; Wiring Configuration For Automatic Motor Adaptation (Ama) - Danfoss VLT HVAC Drive FC 102 Operating Manual

Operating Guide | VLT® HVAC Drive FC 102

8 Wiring Configuration Examples

8.1 Application Examples

The examples in this section are intended as a quick reference for common applications.
• Parameter settings are the regional default values selected in parameter 0-03 Regional Settings, unless otherwise indicated.
• Parameters associated with the terminals and their settings are shown next to the drawings.
• Required switch settings for analog terminals A53 or A54 are also shown.

8.1.1 Wiring Configuration for Automatic Motor Adaptation (AMA)

Table 49: Wiring Configuration for AMA with T27 Connected
XD2.10
+24 V
XD2.11
+24 V
XD2.12
D IN
XD2.13
D IN
XD2.18
COM
D IN XD2.14
D IN XD2.15
D IN
XD2.16
D IN
XD2.17
D IN
XD2.19
Danfoss A/S © 2018.10
Parameters
Function
Parameter 1-29 Automatic Motor Adaptation (AMA)
Parameter 5-12 Terminal 27 Digital Input
*=Default value
Notes/comments:
Set parameter group 1-2* Motor Data according to motor nameplate.
Terminal 27 in the parameter title corresponds to terminal XD2.14 in the control compartment.
Wiring Configuration Examples
Setting
[1] Enable complete AMA
[2]* Coast inverse
AQ262141314214en-000101 / 130R0880 | 109