Connecting The Camera To A Smartphone Compatible With Bluetooth Low Energy - Panasonic LUMIX DC-LX100M2 Operating Instructions Manual

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

11. Using the Wi-Fi/Bluetooth function
Connecting the camera to a smartphone compatible with Bluetooth low
energy
You can connect the camera to a smartphone via a Bluetooth connection.
• Supported smartphones
Android:
Android 5.0 or higher equipped with Bluetooth 4.0 or higher (excluding
those that do not support Bluetooth low energy)
iOS:
iOS 9.0 or higher (excluding the iPad 2)
Connecting for the first time
Pairing needs to be set up only for the first connection. After pairing is set up, a Wi-Fi
connection will be made automatically.
(On the camera)
>
[Setup] > [Bluetooth] > [Bluetooth] >
MENU
[SET] > [Pairing]
• The camera enters pairing standby mode and displays its device
name.
(On your smartphone)
1
Start "Image App".
• If a message is displayed indicating that the smartphone is
searching for cameras, close the message.
2
Select [Bluetooth].
3
Turn on the Bluetooth.
4
Select the device name displayed on the camera's screen from the [Camera
enable to be registered] list.
• Bluetooth connection between the camera and the smartphone will be made.
(For Android devices) A Wi-Fi connection will be made by selecting [Connection].
If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).
• If [Wi-Fi Password]
of purchase, [Wi-Fi Password] is set to [OFF])
• If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile.
1 Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
2 Press the home button to close the browser.
5
Turn on the Wi-Fi function in the smartphone's setting
menu.
6
On the Wi-Fi setting screen, select the SSID displayed on
the camera. (the device name selected in step
• If the SSID is not displayed, it may be displayed after the Wi-Fi
function is turned off and on.
• When you need to change the connected device, follow the
on-screen message to change the setting.
(P269)
is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time
231
4
Wi-Fi
)
0123456789ABC

Advertisement

Table of Contents
loading

Table of Contents