Table of Contents
Advertisement
10. Using Menu Functions
[Focus/Release Priority]
Set whether to give priority to focus or shutter release during Auto Focus.
• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
[FOCUS]
Disables recording when focus is not achieved.
Performs recording while controlling the balance between focusing and
[BALANCE]
shutter release timing.
[RELEASE]
Enables recording even when focus is not achieved.
[Focus Switching for Vert / Hor]
Focus positions are stored separately for the camera's horizontal and vertical orientations.
Memorises separate positions for horizontal
and vertical orientations (two vertical
orientations, left and right, are available).
• The following last-specified positions will be
[ON]
memorised.
– The last AF area position (when [
– The last MF Assist display position
[OFF]
Sets the same setting for both horizontal and vertical orientations.
[Loop Movement Focus Frame]
When setting the AF area position or the MF Assist display position, you can now loop the
position from one edge to the other edge of the screen.
[AF Area Display]
This changes the AF area display setting for when the Auto Focus Mode is set to [
([49-Area]) or [
], etc. ([Custom Multi]).
Displays AF areas on the recording screen.
• AF areas are not displayed when the default AF area setting is applied to
[ON]
Displays AF areas on the recording screen for just a few seconds after you
[OFF]
start using them.
• Even when [ON] is set, the same operation as [OFF] is performed in the following cases:
– When recording motion pictures
– When recording 4K photos
[
] ([49-Area]) or [
], [Ø] or [
], [
] or [
] in [Custom Multi].
188
] is used)
]
Advertisement
Table of Contents
