Panasonic LUMIX DC-LX100M2 Operating Instructions Manual page 294

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

13. Others
The recorded picture looks rough.
Noise appears on the picture.
• Decrease the ISO sensitivity.
• Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the
items other than [Noise Reduction].
• Set the [Long Shtr NR] to [ON].
The subject appears distorted on the picture.
• During recording with the electronic shutter, motion picture recording and 4K photo recording, if
you take a picture of a moving subject, it may appear distorted on the picture.
This is characteristic of MOS sensors which serve as the camera's pickup sensors. This is not
a malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may
change or horizontal striping may appear on the screen.
(P93)
(P175)
(P179)
294

Advertisement

Table of Contents
loading

Table of Contents