Table of Contents
Advertisement
13. Others
Wi-Fi function
∫
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key.
• It may not be possible to connect to a wireless access point depending on the radio wave
condition of other devices. Check the status of other devices that are connected to the
wireless access point and devices that use the 2.4 GHz frequency.
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
• Radio waves from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
Reconnect the connection again.
[Connection failed]
• Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
Others
∫
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• This feature can only be used with pictures that comply with the DCF standard (P163).
Perform formatting
[Cannot be set on this picture]
• Images that do not comply with the DCF standard
[A folder cannot be created]
• A folder cannot be created because there are no remaining folder numbers that can be used.
Perform formatting
If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to
100.
(P208)
[Please turn camera off and then on again]/[Lens not detected. Please turn camera
on again.]/[System Error]
• Turn the camera off and on. If the message is still displayed even after repeating this a few
times, contact the dealer where you purchased the camera.
(P28)
on this unit after saving necessary data on a PC, etc.
(P28)
on this unit after saving necessary data on a PC, etc.
(P163)
cannot be edited on the camera.
291
(P265)
Advertisement
Table of Contents
