Adjust The Flash Output; Synchronising The Output Of The Flash To The Exposure Compensation - Panasonic LUMIX DC-LX100M2 Operating Instructions Manual

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

7. Stabiliser, Zoom and Flash

Adjust the flash output

Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
Preparation: Set [Wireless] and [Firing Mode] in [Flash] to [OFF] and [TTL], respectively.
1
Select the menu.
>
MENU
2
Press 2/1 to set the flash output and then press [MENU/SET].
• You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.

Synchronising the output of the flash to the Exposure Compensation

Applicable modes:
The flash output is automatically adjusted in accordance with the exposure compensation
value.
>
[Rec] > [Flash] > [Auto Exposure Comp.]
MENU
Settings: [ON]/[OFF]
• For details on Exposure Compensation, refer to P91.
[Rec] > [Flash] > [Flash Adjust.]
152

Advertisement

Table of Contents
loading

Table of Contents