Table of Contents
Advertisement
3. Recording Modes
Intelligent Auto Plus Mode allows you to adjust the settings below while also using
Intelligent Auto Mode for other settings.
Setting the brightness
Setting the colour tone
Defocus Control
Menus that can be set
Auto Focus, Face/Eye Detection, and Face Recognition
∫
The Auto Focus Mode is automatically set to [š]. If you touch the subject, the AF tracking
function will work.
• The AF tracking function will also work if you press [
shutter button halfway.
• When [Face Recog.] is set to [ON], and the face similar to the registered
face is detected, [R] is displayed in the top right of [
About the flash
∫
When recording with the flash, the camera automatically selects [
according to the type and brightness of the subject.
• Refer to
P147
for details about external flashes.
• When [
] or [
• Shutter speed will be slower during [
Scene Detection
∫
• Use a tripod or similar support when the scene detection has been identified as [
When the camera has judged that camera shake is minimal, the shutter speed becomes slower
than normal.
Take care not to move the camera while taking pictures.
• Depending on recording conditions, different scene types may be selected for the same
subject.
The Backlight Compensation
When there is a backlight, the subject appears darker and the camera will automatically
attempt to correct it by increasing the brightness of the picture.
Backlight Compensation works automatically in Intelligent Auto Plus Mode or Intelligent
Auto Mode.
Intelligent Auto Plus Mode
Many
] is set, Red-Eye Removal is enabled.
±
±
±
] and then press the
], [
] and [
] or [
].
59
Intelligent Auto Mode
—
—
—
Few
].
], [
], [
] or [
].
]
Advertisement
Table of Contents
