Panasonic LUMIX DC-LX100M2 Operating Instructions Manual page 186

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

10. Using Menu Functions
>
[Custom] >
MENU
[ISO Increments]
This changes the increments used to set the ISO sensitivity.
Settings: [1/3 EV]/[1 EV]
[Extended ISO]
ISO sensitivity can be set up to minimum [ISO100].
[Exposure Comp. Reset]
This resets the exposure compensation value set with the function button when you
change the Recording Mode or turn off the camera.
>
[Custom] >
MENU
[AF/AE Lock Hold]
When [ON] is selected, focus and exposure stays locked even if you press and release
[AF/AE LOCK].
To clear the lock, press [AF/AE LOCK] again.
[Shutter AF]
Set whether or not the focus is adjusted automatically when the shutter button is pressed
halfway.
[Half Press Release]
The shutter will immediately fire when the shutter button is pressed halfway.
[Quick AF]
The camera automatically adjusts the focus when the amount of camera blur becomes
small.
This will speed up the focusing that takes place when you press the shutter button.
• The battery will be consumed faster than usual.
Not available in these cases:
• This function is not available in the following cases:
– In Preview Mode
– In low light situations
[Exposure]
[Focus / Release Shutter]
186

Advertisement

Table of Contents
loading

Table of Contents