Table of Contents
Advertisement
10. Using Menu Functions
[Highlight Shadow]
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
>
[Rec]/
MENU
(Standard)
(Raise the contrast)
(Lower the contrast)
(Brighten dark areas)
/
/
(Custom)
1
Rotate the control ring to adjust the brightness of
bright areas and rotate the control dial to adjust the
brightness of dark areas.
A Bright portion
B Dark portion
• Adjustments can also be made by dragging the graph.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
2
Press [MENU/SET].
• The screen display can be switched by pressing [DISP.] on the brightness adjustment screen.
• Turning off this unit will return the setting adjusted with
setting.
Not available in these cases:
• [Highlight Shadow] cannot be set in the following cases:
– When using [Panorama Shot]
– When using [Filter Settings]
[Motion Picture] > [Highlight Shadow]
A state with no adjustments is set.
Bright areas are brightened, and dark areas are darkened.
Bright areas are darkened, and dark areas are brightened.
Dark areas are brightened.
Registered custom settings can be applied.
)/[Custom2] (
)/[Custom3] (
177
)).
/
/
/
back to the default
Advertisement
Table of Contents
