Table of Contents
Advertisement
2. Getting Started/Basic Operations
Shutter button (Taking pictures)
The shutter button works in two steps.
1
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will turn red and blink if the exposure is not correct.)
• Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the indication
flashes.)
2
Press the shutter button fully (push it in further), and
take the picture.
• Pictures cannot be taken until focus is achieved when [Focus/Release Priority] is set to
[FOCUS].
• When [Monitor Display Speed] or [LVF Display Speed] (or both) is set to [ECO30fps],
Digital Zoom is not available.
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
Focus range
∫
Focus range is displayed when operating the zoom.
The focus range may change gradually depending
on the zoom position.
D Recordable range indication
• The focus range is displayed in red when it is not focused after pressing the shutter button
halfway.
37
Advertisement
Table of Contents
