Panasonic LUMIX DC-LX100M2 Operating Instructions Manual page 148

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

7. Stabiliser, Zoom and Flash
In the following cases, the flash is fixed to [Œ] ([Forced Flash Off]).
• When recording motion pictures
• When recording 4K photos
• When recording with the Post Focus function
• When using [Panorama Shot]
• When using the electronic shutter
• When an image effect in [Filter Effect] of [Filter Settings] is set
• When [Silent Mode] is set to [ON]
• When [HDR] is set to [ON]
When using other commercially available external flashes without
communication functions with the camera
• Set the exposure on the external flash.
• Set the Recording Mode to Aperture-Priority AE Mode or Manual Exposure Mode. Set the
same aperture value and ISO sensitivity setting on the camera and the external flash.
The available flash range when [Sensitivity] setting is [AUTO]
Edges of picture may become slightly dark if using flash at short distances without using
zoom (close to max. Wide). This may be remedied by using a little zoom.
Max. Wide
Approx. 60 cm (2.0 feet) to 14.1 m (46 feet)
¢ When the flash (supplied) is attached, [Sensitivity] is set to [AUTO], and [ISO Auto Upper
Limit (Photo)] is set to [AUTO]
• You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even
when attaching the external flash.
• If you record at close range with a wide angle, light from the flash may be blocked by the lens,
darkening the lower part of the screen.
• It may take time to charge the flash if you repeatedly take pictures. You must wait a moment to
take the next picture while the flash icon is blinking red indicating the flash is charging.
• Do not bring any objects near the flash. The heat and light from the flash may cause the
objects to deform or discolour.
• Do not use commercially available external flashes with high-voltage synchro terminals,
reverse polarity or functions that enable them to communicate with the camera. Doing so may
cause the camera to malfunction or operate incorrectly.
• When attaching the external flash, do not hold only the external flash because it may detach
from the camera.
• Read the operating instructions of the external flash for details.
¢
Approx. 30 cm (0.98 feet) to 8.5 m (28 feet)
148
Max. Tele
¢

Advertisement

Table of Contents
loading

Table of Contents