Table of Contents
Advertisement
11. Using the Wi-Fi/Bluetooth function
Using a password to set up a connection
When [Wi-Fi Password] is set to [ON], you can enhance security by using manual entry or
a QR code for password authentication.
Preparations: (On the camera) Set [Wi-Fi Password] to [ON].
Using the QR code to set up a connection
∫
(On the camera)
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] >
MENU
[New Connection] > [Remote Shooting &
View]
A SSID and password
B QR code
• The information (QR Code, SSID and Password) required for
directly connecting your smartphone to this unit is displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
(On your smartphone)
1 Start "Image App".
2 Select [QR code].
• When the smartphone is connected to a wireless access point, it may take time to display
[QR code].
• (For iOS devices) A confirmation screen will be displayed. Select [OK] to proceed.
3 Use the "Image App" to scan the QR code displayed on the screen of the camera.
• To enlarge the QR code, press [MENU/SET] on the camera.
If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).
4 Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the smartphone's setting menu.
7 On the Wi-Fi setting screen, select the SSID displayed on the
camera.
8 Start "Image App".
• (iOS devices) Steps 1 through 5 are not required from the second
time on.
(P269)
234
Wi-Fi
0123456789ABC
Advertisement
Table of Contents
