Long Shtr Nr] - Panasonic LUMIX DC-LX100M2 Operating Instructions Manual

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

10. Using Menu Functions
[ISO Auto Upper Limit (Photo)]
Applicable modes:
You can set the upper limit of ISO sensitivity when ISO sensitivity is set to [AUTO] or [
>
[Rec] > [ISO Auto Upper Limit (Photo)]
MENU
Settings: [AUTO]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[25600]
[Min. Shtr Speed]
Applicable modes:
Set the minimum shutter speed when the ISO sensitivity is set to [AUTO] or [
>
[Rec] > [Min. Shtr Speed]
MENU
Settings: [AUTO]/[1/16000] to [1/1]
• The shutter speed may become slower than the set value in situations where proper exposure
cannot be obtained.
Not available in these cases:
• The desired compensation effect may not be achieved depending on the recording conditions.
• [Min. Shtr Speed] cannot be set in the following case:
– When using [Panorama Shot]

[Long Shtr NR]

Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night or similar scenery.
>
[Rec] > [Long Shtr NR]
MENU
Settings: [ON]/[OFF]
• [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
Not available in these cases:
• This function is not available in the following cases:
– When recording motion pictures
– When recording 4K photos
– When recording with the Post Focus function
– When using [Panorama Shot]
– When using the electronic shutter
179
].
].

Advertisement

Table of Contents
loading

Table of Contents